Kenton Mono(supplied prior to mid 1990) Manual de usuario descargar pdf

INSTRUCTIONS FOR MIDI INTERFACE

FOR EARLY MONO SYNTH RETROFITS - fitted before approx June 1990

MIDI - - -

First - a few words about Midi. Midi is an acronym of Musical

Instrument Digital Interface. It is a system for transferring

information between synths or other equipment. The information is

sent in digital format using codes laid down by the international

Midi committee.

USING THE INTERFACE - - -

When you first turn on the synthesiser you will be in what is called

omni on - poly mode. What this means in effect is that the interface

is listening on all the Midi channels at once, and will respond to

information on any of them. You can switch to omni off - poly mode by

using the program mode push button and selecting a receive channel.

What this means is that you can set the interface to respond to Midi

information in one channel only.

(n.b. programming on this synth is accomplished by pressing the mode

change push button and then pressing keys on an EXTERNAL keyboard.

The top C referred to, is top C on a 61 note keyboard.)

MODE CHANGE PUSH BUTTON

This push button has several functions :-

1) Pressing once enters program mode. This enables you to program

in such things as receive / transmit channel number information etc.

Once you have entered program mode, the interface will stay in that

mode until top C on the keyboard is pressed, and until that time, any

key pressed will change a parameter.

On the following page is a list of what each key will do if

pressed during program mode.

2) Pressing once and holding for a couple of seconds enters transpose

mode. You will know this has happened because middle C will sound,

and continue to do so until you press another key. You are then

returned to playing mode.

Whichever note you press on the remote keyboard becomes the new

middle C via midi.

Transpose mode cannot be entered from program mode.

FILTER

Filter can also be controlled by controller number 4 or aftertouch

instead of velocity by selecting it while in program mode. (see above

& next page)

1 2 3

Indice de contenidos

Pagina 1

INSTRUCTIONS FOR MIDI INTERFACE FOR EARLY MONO SYNTH RETROFITS - fitted before approx June 1990 MIDI - - - First - a few words abo

Pagina 2

C Receive channel 1 [Bottom C on DX-7] Midi note 36 (24h) Db " " 2 D " " 3

Pagina 3

MIDI CONTROL OF RED PUSH BUTTON The red push button can be "pressed" via midi as midi switch number 95 (5Fh) for regular progra

Comentarios a estos manuales

Sin comentarios

Kenton Mono(supplied prior to mid 1990) Manual de usuario

Busca en linea o descarga Manual de usuario para Equipo Kenton Mono(supplied prior to mid 1990). Kenton Mono(supplied prior to mid 1990) User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Kenton Mono(supplied prior to mid 1990)